Spiegel6 Spiegel2 Spiegel14
OptiLayer:  Your Partner in Design and Post-Production Characterization of Optical Coatings

 

Color Targets

In order to design optical coatings with specified color properties,  Color Targets are to be specified. OptiLayer allows one to specify up to 99 color targets. Each target contains:

  • Type of color characteristic (according to selected Color Space)
  • Angle of incidence
  • Spectral Characteristic (reflectance, transmittance and/or back side reflectance)
  • Polarization type (S, P and A-averaged)
  • Values of color coordinates
  • Tolerances
  • Qualifiers (for Range Targets)

Convenient Preview Option allows one to visualize specified color targets.

See a video example at YouTube YouTube

color design

Example. Color Targets for a multilayer reflecting light of yellow and blue colors from its front and back sides. The coating transmits white light. (To see how Preview option works, put the mouse over the picture)

color design color coating
Designing of color coating reflecting yellow and blue colors from its front and back sides.

Color Range Target are specialized targets described by a convex polygon. Range Color Target are available for Chromaticity, CIE YU'V' 1976, CIE YU'V' 1960, Hunter Lab, CIE L*a*b*, CIE L*ru*v* color spaces. Starting with v. 11.65 polar color coordinates are also supported by this option.

If a point in the selected color space is inside a polygon of the Color Range Target, the corresponding term in the Merit function is zero. If the point is outside the polygon, the corresponding term in the Merit function is computed as a squared distance from the point to the boundary of this convex polygon.

optical coatings Lab color system

Color RangeTarget

Color Targets also allows to specify requirements for minimal relative change of color between some color calculated at a given angle and other parameters and the current color. For this purpose Anchor Color concept is introduced.

Anchor Color is a color of the same design computed at some given angle of incidence, characteristic (T, R, BR) and polarization.

For Color Targets with anChor qualifier it is necessary to specify the Anchor Color. It can be done with Anchor Parameters dialog:

Color Anchor

Easy to start

Icons 100x100 1OptiLayer provides user-friendly interface and a variety of examples allowing even a beginner to effectively start to design and characterize optical coatings.        Read more...

Docs / Support

Icons 100x100 2Comprehensive manual in PDF format and e-mail support help you at each step of your work with OptiLayer.

 

Advanced

Icons 100x100 3If you are already an experienced user, OptiLayer gives your almost unlimited opportunities in solving all problems arising in design-production chain. Visit our publications page and challenge page.

 

Go to top