Spiegel6 Spiegel2 Spiegel14
OptiLayer:  Your Partner in Design and Post-Production Characterization of Optical Coatings

 

New options in Electric Field Representation

Electric field plot now respects settings of Thickness units. Before X-axis was always represented in Physical thickness units.

Evaluation of the standing wave electric fields inside a stack of films is effected with the Field command from the Analysis Menu. OptiLayer computes the electrical field intensity inside the current design and plots it in the graphical form shown below. The physical thickness profile of the layers in the design is represented by the design bar displayed just below the graph of electric field strength. The design bar shows the  different layer materials in different colors and/or patterns, the number of layers N and the overall thickness Th of the coating design are also displayed.

\(|E|^2\) values are expressed in relative units when incident wave has \(|E|^2=100\%\). Since these values are quadratic, \(|E|^2\) can reach 400% in the incident medium for the case of high reflectors.

 electric field in optical coatings
 EFI ThicknessUnits 1  EFI ThicknessUnits 2

Easy to start

Icons 100x100 1OptiLayer provides user-friendly interface and a variety of examples allowing even a beginner to effectively start to design and characterize optical coatings.        Read more...

Docs / Support

Icons 100x100 2Comprehensive manual in PDF format and e-mail support help you at each step of your work with OptiLayer.

 

Advanced

Icons 100x100 3If you are already an experienced user, OptiLayer gives your almost unlimited opportunities in solving all problems arising in design-production chain. Visit our publications page and challenge page.

 

Go to top