Spiegel6 Spiegel2 Spiegel14
OptiLayer:  Your Partner in Design and Post-Production Characterization of Optical Coatings

 

List of changes in the hot-fix version 11.03d (released 18 March 2016)

In OptiLayer:

  1. Fixed very rare situation when computations were failing with Cone Angle loaded to memory. It happened only with very special combinations of Cone parameters and parameters of targets.
  2. Since Floating Constants were not designed for Angular mode, this option is now blocked when Angular mode is ON.
  3. Fixed Column Editor error appearing when some cells in the column had disabled (N/A) status.
  4. Status bar display of C*, H(ab) and C*, h(uv) values was incorrect. After the fix mouse pointer coordinates are converted to color coordinates correctly for the both polar coordinate diagrams.
  5. Small issues fixed when importing Essential Macleod Designs and Stacks.

In OptiChar:

  1.  Fixed very rare situation when computations were failing with Cone Angle loaded to memory. It happened only with very special combinations of Cone parameters and parameters of measurements.
  2.  Fixed problems with right-click menus in Source, Detector, Cone Angle, Line Width Editors.
  3.  Fixed Column Editor error appearing when some cells in the column had disabled (N/A) status.
  4.  Status bar display of C*, H(ab) and C*, h(uv) values was incorrect. After the fix mouse pointer coordinates are converted to color coordinates correctly for the both polar coordinate diagrams.
  5.  n(lambda) and k(lambda) models problem: modifications introduced in v. 11.03b had an undesired effect, when the non-parametric models were reset on repeated computations.

In OptiRE:

  1. Fixed very rare situation when computations were failing with Cone Angle loaded to memory. It happened only with very special combinations of Cone parameters and parameters of measurements.
  2. Fixed problems with right-click menus in Source, Detector, Cone Angle, Line Width Editors.
  3. Fixed Column Editor error appearing when some cells in the column had disabled (N/A) status.
  4. Status bar display of C*, H(ab) and C*, h(uv) values was incorrect. After the fix mouse pointer coordinates are converted to color coordinates correctly for the both polar coordinate diagrams.
  5. Small issues fixed when importing Essential Macleod Designs and Stacks.

Easy to start

Icons 100x100 1OptiLayer provides user-friendly interface and a variety of examples allowing even a beginner to effectively start to design and characterize optical coatings.        Read more...

Docs / Support

Icons 100x100 2Comprehensive manual in PDF format and e-mail support help you at each step of your work with OptiLayer.

 

Advanced

Icons 100x100 3If you are already an experienced user, OptiLayer gives your almost unlimited opportunities in solving all problems arising in design-production chain. Visit our publications page and challenge page.

 

Go to top