Spiegel6 Spiegel2 Spiegel14
OptiLayer:  Your Partner in Design and Post-Production Characterization of Optical Coatings

 

List of changes in the hot-fix version 11.65e (released 29 March 2017)

OptiLayer

  1. Resolved conflicts with some applications (for example, Autodesk A360 Desktop) installing a virtual drive in Windows.
  2. Fixed a problem with normalization in Integral, Values window for the display of Integral values.
  3. Validation of input parameters for U- and g-values option improved in order to avoid divide by zero errors in some cases.
  4. The expression of the heat transfer coefficient towards the inside adjusted for the corrected emissivity value.
  5. About box truncated important User ID/Key ID information at High DPI displays.

OptiRE

  1. Resolved conflicts with some applications (for example, Autodesk A360 Desktop) installing a virtual drive in Windows.
  2. Validation of input parameters for U- and g-values option improved in order to avoid divide by zero errors in some cases.
  3. The expression of the heat transfer coefficient towards the inside adjusted for the corrected emissivity value.
  4. About box truncated important User ID/Key ID information at High DPI displays.

OptiChar

  1. Resolved conflicts with some applications (for example, Autodesk A360 Desktop) installing a virtual drive in Windows.
  2. About box truncated important User ID/Key ID information at High DPI displays.

Easy to start

Icons 100x100 1OptiLayer provides user-friendly interface and a variety of examples allowing even a beginner to effectively start to design and characterize optical coatings.        Read more...

Docs / Support

Icons 100x100 2Comprehensive manual in PDF format and e-mail support help you at each step of your work with OptiLayer.

 

Advanced

Icons 100x100 3If you are already an experienced user, OptiLayer gives your almost unlimited opportunities in solving all problems arising in design-production chain. Visit our publications page and challenge page.

 

Go to top