Spiegel6 Spiegel2 Spiegel14
OptiLayer:  Your Partner in Design and Post-Production Characterization of Optical Coatings

 

Optimizing Absorptance in Selected Layers 

In the forthcoming release of OptiLayer, a new type of targets to be implemented. Namely "Layer Absorptance Target". The purpose of this target is to provide OptiLayer with the ability to optimize absorptance of energy in one layer or in a group of layers. These layers are selected on the basis of material abbreviation, therefore these new targets also works with Needle synthesis.

In the solar cell presented on the right panel, we have a 5-layer coating. We assume  that all the incoming photons are converted into electric charges in the third layer (intrinsic a-Si:H) only. Our goal is to maximize the amount of light absorbed in the third layer by varying the thickness of all five layers.

The coating structure should be kept unchanged in the course of the optimization process, i.e. layer thicknesses must take values from the specified ranges. No layers can disappear. In this case constrained optimization method can be used. 

See our video example at YouTube YouTube.

Example: A solar cell structure (M. Zeman, “Optical modeling of a a-Si:H solar cells with rough interfaces: Effect of back contract and interface roughness”, J. of Appl. Phys., Vol. 88, 2000)

coatings for solar cells

Design structure: 

optical coatings for solar cells

Corresponding materials abbreviations: 

multilayer coatings for solar cells

In Layer Absorptance Target you should specify target absorption in a desired spectral range and push Target button.  

optimization layer absorptance

In the Layer Absorptance Target Selection dialog, you specify material abbreviation that will be used in the course of the optimization. In this example, layer number 3 is the layer of i-a-Si layer material. This material has the abbreviation IASI. We would like to maximize absorptance in this layer in the spectral range from 400 nm to 800 nm.

optimization layer absorptance 

Constrained optimization settings: 

 coatings for solar cells

As a result of the constrained optimization, the absorptance in the third layer is increased

optimization layer absorptance

Easy to start

Icons 100x100 1OptiLayer provides user-friendly interface and a variety of examples allowing even a beginner to effectively start to design and characterize optical coatings.        Read more...

Docs / Support

Icons 100x100 2Comprehensive manual in PDF format and e-mail support help you at each step of your work with OptiLayer.

 

Advanced

Icons 100x100 3If you are already an experienced user, OptiLayer gives your almost unlimited opportunities in solving all problems arising in design-production chain. Visit our publications page and challenge page.

 

Go to top